Performance Introduction |
The CNC Lathe CKE6136 has a level configuration. The motions of cross (X) and longitudinal(z) axis are controlled by CNC system. The machine is suitable for such machining process as automatically turning internal and external cylindrical surface, curve, end face, slot, chamfer, metric and inch thred, thread on end face, conic thread, etc for sorts of shaft parts and disc parts. The machine can adopt FANUC-0TD,Yaskawa R2J50L CNC system as well as other CNC system required by customers, comprising corresponding servo motor respectively as drive unit, and taking pulse encoder as measuring unit to consist of semi-closed loop of CNC system. The spindle drive has three types for the buyer to choose. The first type is manual type which adopts manual shift gears. The second type is frequency conversion type which abopts frequency conversion motor to realize infinitely variable speed change (no shift gears).The third type is servo type which adopts servo motor for infinitely variable speed change. The machine comprises vertical 4-position electrical tool post, manual chuck and manual tailstock. The surfaces of saddle and slide plate coupling to the guideways are plastic coated. The makes such static and dynamic performance as rigidity and frictional damping coefficient of the feed units get the best status, makes the moveable parts get accurate minute movement, and facilitates improving machining accuracy and service life of the guideways. The braking of the spindle is realized by the braking device installed at the end of the motor shaft. After finishing auto-cycle, the magnet of the braking device at the end the motor shaft is energized and creates magnetic force to attract and engage the braking disc to realize braking .After the braking is finished, the braking device is released and the spindle can rotate again. Full cover is adopted by this machine to protect operator against the splash of the chips and the coolant.
|
